Polyurethane Varnish Trade
Traditional, solvent based varnish. Tough protection against knocks, scuffs and scratches.
- Clear finish
- Recoat in 6 hours
- Solvent based
- For interior wood
- Available in Mattcoat, Satinglaze, Hardglaze
- Recoat in 6 hours
- Solvent based
- For interior wood
Allow us to use your location
To access tailored content on this page, enable location cookies. Review your cookie preferences and ensure statistical cookies are enabled for the best experience.
Buy Online
How much do I need?
Measure your area precisely, drop the numbers into this smart calculator and it will tell you straight away how many litres you'll need to complete your project.
-
Interior wood
Clear
Ho to use Polyurethane Varnish
Before you start
Sand the wood with 120 grit paper. Wear a mask to avoid inhaling any dust. Wipe away dust with white spirit and leave to dry. Make sure the room is ventilated. Stir well before use and test on a small area to check you are happy with the finish.
Application
Use a brush and apply 3 coats in the direction of the grain. Leave 6 hours between each coat and lightly sand with 240 grit paper before the final coat.
Clean up
Remove any varnish from your brush and wash in white spirit. Don't put any left over varnish down the drain or into watercourses. Your local authority may have facilities to get rid of unused varnish.
Safety Data Sheet
BBA approved
Find the right product
Tell us about your DIY project and we’ll show you which products you need.
