Ultimate Fence Life Concentrate
Our Ultimate Fence Life Concentrate gives our longest lasting protection. It's unique formula provides advanced water beading technology and protects from the harshest of weather conditions so you can be confident that your shed and fence will look great for years to come. All you have to do is add water!
- Our longest lasting formula
- Advanced water beading technology
- Showerproof in one hour
- One pouch makes 5L of paint
- Protects in all weather conditions
- All weather protection
- Showerproof in one hour
- Brush or spray on
Allow us to use your location
To access tailored content on this page, enable location cookies. Review your cookie preferences and ensure statistical cookies are enabled for the best experience.
Buy Online
How much paint do I need?
Measure your area precisely, drop the numbers into this smart calculator and it will tell you straight away how many litres you'll need to complete your project.
Do not use on decking.
Need to know
If you have a brand new fence, you should let it weather for around six months before you paint it.
Don't worry about stripping old coatings. Just use a stiff brush to get rid of any dirt and or loose bits of paint and you're good to go!
Two coats for rough and smooth wood
One pouch covers up to three fence panels
Apply with a brush or use one of our sprayers
Good to know...
The best time to treat your fences is in spring. At this time the temperature is more favourable and vegetation which would normally get in the way will not have grown too much. Treating at this time means the hard work is done in time to enjoy the summer.
How to paint your fence with Ultimate Fence Life Concentrate?
Mix up your paint!
STEP 1
Snip corner and empty liquid into a bucket.
STEP 2
Cut along on the second line.
STEP 3
Fill pouch with water to the 'water fill line' mark and pour the water into the bucket. Do this four times.
STEP 4
Stir bucket until colour is consistent.
That's it, you're ready to paint!
Preparation
If you're applying to damp wood, make sure the wood has been drying for at least 5 hours before painting.
Make sure it's a warm, dry day (above 10°C). Clean the wood with a stiff brush to get rid of any dirt. If you're spraying it on, always read the sprayer instructions first.
Check you're happy with the colour, find a small hidden patch of wood and try it on first.
Application
With a brush
Get loads of Ultimate Fence Life on your brush. Put a thick coat on and if you see any drips, brush them in.
With a sprayer
Pour the liquid into the tank. Pump it up or turn it on and start spraying. When spraying use long, sweeping, horizontal arm movements. Move along the full length of the panel, drop down and do the same again. Overlap by 50% with each pass. This will make sure the whole area is covered with the correct amount of product.
You'll need 2 coats but, if your wood is very weathered, you may need another coat. Leave 4 hours between coats.
Clean up
Take as much product as possible off your brush and then clean it in warm, soapy water.
If you've used a sprayer, follow the clean up instructions in the sprayer instruction manual.
Don't empty any Ultimate Fence Life Concentrate into drains or watercourses. Your local authority may have special ways to get rid of waste product.
Technical specification
Usage | Rough sawn or smooth planed sheds and fences |
Coverage | up to 40m2 |
Dry time | Showerproof in 1 hour, completely dry in 24 hours |
Coat time | 4 hours |
Number of coats | 2 |
Colours | 6 |
Durability | Long lasting, all weather protection |
Application | Brush or spray |
Base | Water |
Sizes | 950ml |
VOC | Low |
How to guides
Easy to follow steps to help you do a professional job on any DIY project.Find the right product
Tell us about your DIY project and we’ll show you which products you need.