One Coat Tile Paint Water Based
Our Tile Paint can transform your old tiles in just one coat. You don’t need to use a primer. It’ll stand up to knocks, scuffs and spills, so you won’t have to do it again any time soon.
- Durable and easy to clean
- Water resistant
- Mould resistant
- Stands up to knocks, scuffs and spills
- No primer needed
- One coat
- Durable & easy to clean
- Water resistant
- Mould resistant
Allow us to use your location
To access tailored content on this page, enable location cookies. Review your cookie preferences and ensure statistical cookies are enabled for the best experience.
Buy Online
How much paint do I need?
Measure your area precisely, drop the numbers into this smart calculator and it will tell you straight away how many litres you'll need to complete your project. It doesn't forget about the coats either.
-
Interior tiles
-
Enamel, porcelain, fibreglass, ceramic
For interior kitchen tiles & generic wall tiles (including porcelain, ceramic & glass)
Black Gloss
Black Satin
White Gloss
White Satin
Granite Grey
Magnolia Satin
Cobalt Grey Gloss
Ivory Satin
Need to know
Available in 3 modern colours with a glossy finish, our Tile Paint takes next to no time to apply.
Watch videoA quick way to redecorate your bathroom and it’s much easier than you think. Just give your tiles a quick scrub and paint straight on.
1 but 2 might be needed if painting a porous surface
Paints up to 8m2 per litre
Roller or brush
1 hour
How to transform your tiles
Before you start
Make sure your room is above 10°C and open a window to keep it ventilated. Cover anything you don’t want to get paint over.
Clean grout with our Grout Cleaner and fix any damaged grout before painting. Then make sure your tiles are cleaned thoroughly to remove all dust, dirt and grease and wipe with a damp cloth.
Application
Give the paint a really good stir. Then paint it on with a synthetic brush. To get the best finish, go up and down, not side to side, on each tile. It’ll be touch dry in just 1 hour, but don’t get it wet for the next 24 hours.
Most of the time one coat is all you ever need. But, if you’re painting over a bold colour you may need a second coat. If this is the case, leave the first coat to dry for 4 hours. Then give it a light sand with 240grit sandpaper and wipe with a damp cloth. Once the surface is dry put the second coat on.
Aftercare
Cleaning
Take off as much paint from your brush or roller as you can. Then wash them in warm soapy water. Don't empty any leftover paint into drains or watercourses. Your local authority may have special ways to get rid of unused paint. Protect from frost.
Maintenance
Avoid abrasive cleaners, these can damage the paint. Clean with soapy water. Don’t get the tiles wet or subject to high humidity for at least 24 hours after painting.
Technical specification
| Usage |
For interior kitchen tiles & generic wall tiles (including porcelain, ceramic & glass) |
| Coverage | 8m2 per litre |
| Dry time | Touch dry in 1 hour |
| Coat time |
If required, overcoat in 4 hours |
| Number of coats | 1 coat (a second coat may be required if painting onto extremely porous substrates) |
| Colours |
White Gloss, White Satin, Granite Grey Satin |
| Finish | Gloss and Satin |
| Application | Brush or roller |
| Paint base | Water |
| Sizes | 750ml |
| VOC | Low |
Find the right product
Tell us about your DIY project and we’ll show you which products you need.
