For Home

Multi Purpose Powder Smooth Finish Filler

Description

Fill holes in almost any surface including plaster, stone, concrete and wood. Our Multi Purpose Powder has a smooth finish so it’s easy to sand. It’s tough too and won’t shrink or crack.

Fill holes up to 40mm deep
Comes with a measuring scoop and applicator
Dry in one to two hours
Suitable for interior and exterior use
Minimal prep needed

FIND A STOCKIST

Dry in 1-2 hours
Comes with applicator
Minimal Prep work needed

Buy Online

Use on the following surfaces

Interior wood
Plaster
Exterior wood
Interior & Exterior stone & concrete

1 colour available including:

White

How do I use it?

Number of coats

One coat for 40mm gaps. More coats needed if gap is deeper.

Coverage

Up to 40mm gap

Application

Measuring scoop and applicator included

Use it on...

Interior or exterior surfaces including plaster, stone, concrete and wood.

How to use Multi Purpose Powder Smooth Finish Filler

Before you start

There’s not a lot of preparation needed, all you have to do is make sure the area is clean from grease and dust and dry too.

Application

Using the measuring scoop, mix two parts filler to one part water.
Push the filler firmly into the hole or crack, leaving a little bit slightly raised above the surface to ensure it’s completely filled.
Before it dries, smooth it with a wet knife.
If you’re filling holes that are deeper than 40mm, you will need to build up in layers waiting one to two hours between layers. Before each is dry, smooth over with a wet knife.

Aftercare

After one to two hours, you’ll be able to redecorate over the filler.

Cleaning

Tools can all be cleaned in warm, soapy water.

Technical Specification

Usage	Interior or exterior surfaces including plaster, stone, concrete and wood.
Dry time	One to two hours
Coat time	One to two hours
Number of coats	One for holes smaller than 40mm, several for holes over 40mm.
Colours	White
Finish	Matt
Durability	Fills deep holes and leaves a tough repair that won’t shrink or crack
Application	Flat scraper
Filler base	Water
Size	500G, 1KG, 2KG
VOC	Minimal