For Home

Kitchen & Bathroom Repair Kit

Description

Fix chips in your sink, bath or appliances easily with our Kitchen & Bathroom Repair Kit. It leaves a tough repair that won’t chip or peel off. The kit also comes with sandpaper so everything you need is in one package.

A tough repair for ugly chips
Suitable for porcelain, enamel, acrylic and fibreglass
Waterproof
The kit contains everything you need to get the job done including a small applicator, foil pack of hardener, a tube of filler and a bottle of touch-up enamel

FIND A STOCKIST

Mould resistant
Waterproof
A tough repair for cracks & chips

Buy Online

Use on the following surfaces

Interior tiles
Enamel, porcelain, fibreglass, ceramic

1 colour available including:

White

How do I use it?

Number of coats

One coat unless covering a bold colour

Coverage

Up to 8m2 per litre

Application

Brush on

Use it on...

Suitable for porcelain, enamel, acrylic, fibreglass and appliances

How to repair chips and cracks in kitchens & bathrooms

Before you start

Make sure the area is clean and dry. Open your doors and windows for extra ventilation.
Test the colour of the enamel on a small, hidden area to make sure you’re happy with the colour.
Lightly sand the damaged area to get rid of any loose bits and wipe down with a damp cloth.
Leave to dry before using the repair kit.

Application

Squeeze out as much of the filler as you need.
Mix in a small amount of hardener and keep mixing until it’s all blended together.
Using the applicator, pack the filler into the chip, leaving it slightly raised above the surface.
Leave it to dry for 30 minutes.
Once dry, sand to a smooth finish. For enamel and porcelain, use the brown sandpaper. For ceramic and fibreglass, use the black sandpaper with a little bit of water.
Wipe away any dust and leave to dry.
Shake the bottle of Touch-up Enamel for two minutes.
Apply one thin coat and wait two hours to dry.
Apply another one or two coats.
It will be touch dry in one hour but leave it 24 hours before getting wet and four days until fully submerging it in water.

Aftercare

Cleaning

Once dry, you can clean the filled patch the same way you do the rest of the appliance.

Technical specification

Usage	Sinks, baths, showers, white goods & tiles. Don’t use on plastic
Coverage	Up to 8m²per litre
Dry time	Filler: 30 minutes Enamel: 24 hours
Coat time	24 hours
Number of coats	2-3
Colours	Cobalt Grey, Black, Lime Green, Ivory, Brilliant White, Granite Grey, Magnolia, Mellow Green, Mocha Brown, Pink Fusion, White Lace, Sandstone, Red Rose
Finish	Satin and Gloss
Durability	Waterproof and mould resistant
Application	Brush
Paint base	Oil
Sizes	0.75L
VOC	High