For Home

Diamond Hard Floor Wax

Description

The protection of a varnish that leaves your floors looking and feeling natural. Dry in 30 minutes and there’s no need to get on your hand and knees to buff it.

Strong protection with a beautiful, natural finish
Dries in 30 minutes
Covers 16m2 per litre
Diamond hard protection with a beautiful finish
Available in two different colours
Low odour so there will be no lingering wax smells

FIND A STOCKIST

Beautiful natural finish
Dries in 30 minutes
Diamond hard protection

Buy Online

Coverage Calculator

How much wax do I need?

Measure your area precisely, drop the numbers into this smart calculator and it will tell you straight away how many litres you'll need to complete your project.

Use for the following wood types

Wooden floors

2 colours available including:

Natural

Natural Oak

Need to know

Nourishes and protects wooden floors after just 30 minutes. Watch our video and find out how to wax your floors.

Quick tip

You can walk on your floors after 8 hours but the wax dries after 30 minutes, so they won’t be out of action for long.

Preparation

Clean dust & dirt then sand

Coat time

2 hours between coats

Coverage

Paints up to 16m2 per litre

Application

Brush on

How to wax your floor

Before you start

Prime decorating weather is a warm room above 10°c. Open all the doors and windows for ventilation and move all your furniture out the room. Always wear a mask when you’re sanding floors, there will be a lot of dust.

How to prepare floors for waxing

Use a floor sander and give the wood a good sanding with 120 grit sandpaper. If you’re preparing a floor that was previously painted, use the floor sander to remove all the previous coating.
Let the dust settle and then vacuum it up
Wipe down your floorboards with white spirit

Application

Give your tin of wax a good stir and paint in the direction of the grain. For the best results, paint three or four floorboards at a time to avoid any overlap marks.
Wait two hours to apply the second coat. Three coats will give you the best results and make your floorboards strong and shiny.
Before applying the final coat, lightly sand the floor to help the wax stick.
Your floor will be ready to walk on in eight hours, and will be completely dry in 24 hours - after which you can move your furniture back into the room.

To wash your brushes, all you need is some warm soapy water.

Aftercare

Vacuum or sweep up any bits of dirt or grit that may scratch your floor. For scuffs or spills, wash it with a damp microfiber cloth.

Repair

If a patch of your beautifully waxed floor gets damaged, just repeat the waxing process on the damaged section.

Technical specifications

Usage	Interior on new or previously painted flooring
Coverage	Up to 16m²
Dry time	Touch dry in 30 minutes
Coat time	Two Hours
Colours	Natural, Natural Oak
Finish	Matt
Durability	Diamond Hard Protection
Application	Brush
Wax Base	Oil based
Sizes	2.5L
VOC	Medium